Siemens Hicom 150 E Office - Advisory Messages

7.8.9 Advisory Messages
Definition
Each optiset E station with a display can activate an advisory message configured in the system.
When an extension that has activated an advisory message is called, the relevant advisory message
appears on the caller`s display.
It is possible to have texts with variable parameters whereby the parameters (e.g. time) are entered
during activation. The terminal`s numeric keypad is available for entering additional characters.
In the case of an optiset E memory additional individualised texts can be entered and sent, but not
stored.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements U
P0/E
- terminal with display
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Number of advisory messages in
system
10 10 10 10
Max. no. characters in advisory
message
24 24 24 24
Dependencies/Limitations
Subject Dependency/Limitation
CFW In the case of a CFW, the advisory message is displayed on the dialled telephone
extension.
Configuration options
This feature does not have to be explicitly configured.
Programming Feature Via Hicom Assistant T
Advisory messages can be modified as shown below using Hicom Assistant T (optiset E memory is
required):
Step Action
1. Change advisory messages
*9531994
2. 19-12 => Display Text Menu - Absence Text
3. Select relevant text
Programming Feature Via Hicom Assistant E
Hicom 150 E Office Rel.1.0 Service Manual - 7.8 Features for internal traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (14 of 17) [06/04/2000 13:11:11]