Advisory messages can be modified via Hicom Assistant E as follows:
Step Action
1. Change advisory messages
Options
2. System Parameters
3. Texts
4. Answer texts
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Activate advisory message with the code *69 or via a previously configured DSS key on an
optiset E terminal with display.
2. Call the extension from another optiset E terminal with display.
3. The message activated appears in the display.
7.8.10 Internal Directory
Definition
On all optiset E terminals with a display it is possible to view the directory of all internal extensions
with their names and numbers as well as entries from the system speed-dialling facility (name,
destination extension number), to perform a selective search and then to call the relevant extension.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements U
P0/E
- terminal with display
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
Directory On terminals with a two-line display, groups ("abc?", "def?", ...) are created
for the selective search. In the case of optiset E terminals with ENB the
keyboard can be used for a selective search.
ENB If the terminal`s local ENB is activated, the `Directory' system function
cannot be activated.
System speed-dialling The name is only displayed in the case of system speed-dialling if the
directory has been activated.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (15 of 17) [06/04/2000 13:11:11]
To Next Page
Loading...
