5. The Plus Product starts up automatically at system startup or is started later by the user.
The following additional information must be entered when starting the program for the first
time:
Full path and name of the Plus Product
Parameters, which should be transferred to the Plus Product
The working directory of the Plus Product
The installation program copies all files required for the converter into the installation directory and
enters the converter into the Startup group of MS-Windows 95, which then boots automatically each
time MS-Windows 95 is started.
As mentioned under point 5) above, the converter can start the Plus Product automatically if
necessary.
The converter does not have a user interface and is not visible on the taskbar. It is only possible to
shut down the converter by shutting down MS-Windows 95.
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 7.14 Host Link Interface (CSTA Interface)
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_714.htm (3 of 3) [06/04/2000 13:12:03]
To Next Page
Loading...
