Siemens Hicom 150 E Office - Page 574

A diagram is helpful in providing an overview of the situation at the customer's site, for example:
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2.
20-2-1* 12345
Enter the local number of customer A Rte 1: 12345
3.
+ * 67890
Enter the local number of customer B Rte 2: 67890
4.
F2- *2302
National number of customer A Rte 1: 2302
5.
+ *2302
National number of customer B Rte 2: 2302
6.
F2- *49
International number of customer A Rte 1: 49
7.
+ *49
International number of customer B Rte 2: 49
8.
F2- *1
Set the outgoing call number type to local
"customer A"
Rte 1: local
9.
+ *1
Set the outgoing call number type to local
"customer B"
Rte 2: local
10. F8 Return to the main menu System Administration
11. 18-3-1-1 Change the assignment of the extension to the
TRG group
Ext 100: 1
12.
#109
*3
Select ext 109 and assign it to TRG group 3 Ext 109: 3
Hicom 150 E Office Rel.1.0 Service Manual - 8.36 Tenant services
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_836.htm (2 of 5) [06/04/2000 13:12:10]