Siemens Hicom 150 E Office - Assigning Incoming MSI Calls

8.12 Assigning incoming MSI calls
Introduction
You can assign any destination extension to an LS trunk for incoming LS calls during the day or
night.
Example
Extension 205 is to be assigned as an MSI destination extension for line 17 during the day and group
450 is to be assigned during the night.
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 16-16 Activate Non DID,Day Trk 1: 200
3.
#17
Select trunk Trk 17: 200
4.
*xxx
Enter the extension or ringing group number Trk 17: 205
5. 16-17 Call Management Inc., Non DID,Night Trk 17: 200
6.
*450
Change to Ringing Group Trk 17: 450
7. F8-F7 Exit system administration Set time, Set date
As an option, the way in which incoming calls are to be handled further can be defined in Call
Management. For more information, please refer to Section 8.10 in the Configuration guidelines,
"Configuring Call Management with group call and call forwarding - no answer".
Programming with Hicom Assistant E
Step Action
1. Options -> Incoming Calls -> Ringing assignment per line
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.12 Assigning incoming MSI calls
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_812.htm [06/04/2000 13:12:44]