Siemens Hicom 150 E Office - Fmc; Imod; Table 3-6 Variants of the Flash Memory Card and Their Application

Figure 3-3 EXTEB interfaces (S30810-Q2912-Xxxx)
3.2.6 FMC
Introduction
The flash memory card FMC is a plug-in memory card (PCMCIA format) for the CBFC (Hicom 150
E OfficePoint, OfficeCom) and CBMOD (Hicom 150 E OfficePro) central control boards. The FMC
contains the relevant country-specific and release-specific APS.
Table 3-6 Variants of the flash memory card and their application
FMC Part number Application in Hicom 150 E
OfficePro OfficeCom OfficePoint
FMC2 (2 MB) S30807-Q6910-X400 X
FMC4 (4 MB) S30807-Q6910-X300 X X X (1)
FMC6 (6 MB) S30807-Q6910-X200 X (1)
FMC8 (8 MB) S30807-Q6910-X100 X (1) X (1)
(1) Required for the APS transfer feature.
3.2.7 IMOD
Introduction
The integrated modem card IMOD (S30807-Q9607-X) is an optional plug-in card (PCMCIA format)
for the CBFC (Hicom 150 E OfficePoint, OfficeCom) and CBMOD (Hicom 150 E OfficePro) central
Hicom 150 E Office Rel.1.0 Service Manual - 3.2 Central boards
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_31.htm (7 of 20) [06/04/2000 13:03:00]