Table 1, Line 1: Route: 1, Dial rule: 1, min. COS: 15
Table 2, Line 1: Route: 1, Dial rule: 1, min. COS: 6
Table 3, Line 1: Route: 1, Dial rule: 1, min. COS: 5
Table 4, Line 1: Route: 1, Dial rule: 1, min. COS: 4
Table 5, Line 1: Route: 1, Dial rule: 1, min. COS: 3
Table 6, Line 1: Route: 1, Dial rule: 1, min. COS: 2
Switch to the window Least cost routing/Dialling rules table and make the following entries:
Line 1: Rule name: XY, Rule format: A, Procedure: Main network supplier
Automatic network supplier selection (call by call)
Prerequisites for programming example
The most cost-effective network supplier should always be selected on the basis of the call number
and time. The following network suppliers are available:
Telekom: main network supplier, no network code, all local calls all day and all calls between 2:00
and 4:59 and D1 and D2 calls from 18:00 to 8:59.
Mobilcom: network code 01019, all calls between 5:00 and 1:59 apart from local calls.
TelePassport: network code 01024, D1 and D2 calls between 9:00 and 17:59.
If the destination cannot be reached via Mobilcom or Telepassport, the system automatically attempts
to reach the destination via Telekom.
Programming
Go to the window Least cost routing/Codes and flags and activate Release LCR.
Switch to the window Least cost routing/Dial plan and make the following entries:
Line 1: Dialled digits: 0C0171Z, Route table: 1 (D1 calls)
Line 2: Dialled digits: 0C0172Z, Route table: 1 (D2 calls)
Line 3: Dialled digits: 0CNZ, Route table: 2 (local calls)
Line 4: Dialled digits: 0C1Z, Route table: 2 (local calls)
Line 5: Dialled digits: 0CZ, Route table: 3 (all other calls)
Switch to the window Least cost routing/Route table and make the following entries:
Table 1, Line 1: Route: 1, Dial rule: 1, Schedule: C (D1/D2 calls via Telepassport from 9:00 to 17:59)
Table 1, Line 2: Route: 1, Dial rule: 2, Schedule: C (D1/D2 calls via Telekom from 9:00 to 17:59, if
Telepassport is busy)
Table 1, Line 3: Route: 1, Dial rule: 2, Schedule: A (D1/D2 calls via Telekom)
Table 1, Line 4: Route: 1, Dial rule: 2, Schedule: B (D1/D2 calls via Telekom)
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_815.htm (11 of 13) [06/04/2000 13:12:59]
To Next Page
Loading...
