Siemens Hicom 150 E Office - Configuring Call Pickup Groups

8.19 Configuring call pickup groups
Introduction
You can configure call pickup groups. On the basis of the procedure described, it is possible to answer
a call from another extension located in the same call pickup group.
Each extension can be entered in only one call pickup group.
Example
The extensions with numbers 200, 202, 203 and 204 are to comprise call pickup group 1.
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 14-18 Select Call Pickup Group Ext 200: -
3.
*1
Enter ext. 200 in Call Pickup Group 1 Ext 200: 1
4.
+ *1
Enter ext. 201 in Call Pickup Group 1 Ext 201: 1
5.
+ *1
Enter ext. 202 in Call Pickup Group 1 Ext 202: 1
6.
+ *1
Enter ext. 203 in Call Pickup Group 1 Ext 203: 1
7.
+ *1
Enter ext. 204 in Call Pickup Group 1 Ext 204: 1
8. F8 F7 Exit system administration Set time, Set date
Programming with Hicom Assistant E
Step Action
1. Options -> Incoming Calls -> Call pickup
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Hicom 150 E Office Rel.1.0 Service Manual - 8.19 Configuring call pickup groups
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_819.htm (1 of 2) [06/04/2000 13:13:16]