Login procedure at the handset
Step Entry Action Display
1. <Set> + <1> + <On> Start the login procedure by
simultaneously pressing these
keys; wait until the handset is
synchronised
FP 1
2. <Handset> 11568#12* Log in the handset by dialling
<code> + # + <call number> +*
The antenna symbol remains
synchronised if the login
operation is successful
Replace/lock the handset
If a handset has to be replaced in the course of a service operation, the old handset must be logged out
before the replacement handset is logged in.
If the replacement handset is to be logged in with the same PIN code, the logout code must first be
deleted.
The old handset is automatically logged out when the PIN code is overwritten.
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 36 Configure the cordless parameter Cordless
3.
2
Change the PIN code for the 1st handset and thereby
log out the current handsets
Device 1: 11568
4.
* 11223
Enter the new code, thus logging out the old handsets Device 1: 11223
5. F8-F7 Exit system administration Set time, Set date
6. Open the login window now and start the handset login procedure as described.
Programming with Hicom Assistant E
Step Action
1. Options -> Set up station -> Station -> Param -> Type
The handset cannot be logged in with the tool!
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.27 Configuring Hicom cordless 150 E
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_827.htm (2 of 2) [06/04/2000 13:13:44]
To Next Page
Loading...
