8.29 Configuring hotline extensions
Introduction
You can configure an extension so that when the handset is lifted, a connection is automatically set up
to a predefined internal or external destination either immediately or after a delay.
An external destination can be accessed only with the aid of an external CF.
Example
When the handset on extension 120 is lifted for 15 s without dialling, a connection is to be set up
automatically to extension 110.
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 18-2 Traffic restriction, hotline 182 Hotline
3. 1 Hotline dest. 1821 Hotline dest.
4.
*110
Specify the hotline dest.
OfficePoint = 1 hotline dest.
OfficeCom and OfficePro = 6 hotline dests.
1821 Hotline dest.
Hotline 1: 110
5. F7 Return to Hotline 182 Hotline
6. 2 Hotline station number 1822 Hotline stn no.
7.
#120*1
Assign extension 120 to hotline destination 1. (Flatpack
1 Hotline station no.; Compact and Modular 6 Hotline
station no.)
1822 Hotline stn no.
Ext 120: 1
8. F7 Return to Hotline 182 Hotline
9. 3 Hotline timeout 1823 Hotline timeout
10.
*15
Set the time for executing hotline (0-99s). 1823 Hotline timeout
Hotline 1: 15
11. F8-F7 Exit system administration Set time, Set date
Programming with Hicom Assistant E
Step Action
1. Options -> Set up station -> Station -> Parameter -> Flags
2. Options -> System Parameters -> System settings
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_829.htm (1 of 2) [06/04/2000 13:13:58]
To Next Page
Loading...
