Siemens Hicom 150 E Office - Configuring Relocate

8.30 Configuring relocate
Introduction
Relocate can be enabled for the entire system in the system settings. It is executed by means of codes
for logging off and on.
Example
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 22-24 Activate Relocate proc. Mode: -
3.
* 1
Change parameter to: Allowed Mode: Allowed
4. F8-F7 Exit system administration Set time, Set date
Programming with Hicom Assistant E
Step Action
1. Options -> System Parameters -> Flags/CMI
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.30 Configuring relocate
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_830.htm [06/04/2000 13:13:59]