Siemens Hicom 150 E Office - Page 653

6.
#110
Select agent 110 Agent 110: -
7.
*2
Assign UCD group 2 Agent 110: 2
8. Select the next ID Agent 111: -
9.
*2
Assign UCD group 2 Agent 111: 2
10. F8 Return to the main menu System Administration
Assigning group names
UCD - group 1 "purchasing",
UCD - group 2 "sales".
Programming with Hicom Assistant T
Step Entry Action Display
1. 16-15-3 Configure group names Grp 350: -
2.
#440
Select the 1st UCD group Grp 440: -
3.
*Purch.
Define names for the group Grp 440: Purchasing
4. Select the next group Grp 441: -
5.
*Sales
Define names for the group Grp 441: Sales
6. F8 Return to the main menu System Administration
Configuring Call Management
UCD group 1, UCD group 2 and the central queue field (UCD group 60) are each defined via a
call destination list.
Programming with Hicom Assistant T
Step Entry Action Display
1. 16-18-1 Define CM-Targets List1, Mbr1: CALL
2. * Change call destination list 1 List1, Mbr1:
3.
#201
Define UCD group 1 List1, Mbr1: UCD 01
4.
#2
Select call destination list 2 List2, Mbr1: CALL
5. * Change call destination list 2 List2, Mbr1:
6.
#202
Define UCD group 2 List2, Mbr1: UCD 02
Hicom 150 E Office Rel.1.0 Service Manual - 8.32 Hicom 150 E Office - Hicom Agentline Office call distribution
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_832.htm (2 of 5) [06/04/2000 13:14:25]