Siemens Hicom 150 E Office - Page 662

19.
# 2
Dial route Rte 2, Pos 1: 82
20.
* 78
Enter route code Rte 2, Pos 1: 78
21. F8-F7 Exit system administration Set time, Set date
Programming with Hicom Assistant E
Step Action
1. Options -> System Parameters -> Flags/CMI
2. Options -> Lines / networking -> Trunks
3. Options -> Lines / networking -> Routes
4. Options -> Lines / networking -> Routing parameters
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.35 Routes
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_835.htm (2 of 2) [06/04/2000 13:14:34]