Siemens Hicom 150 E Office - Page 664

15.
F2 * 1
Route table 1 is assigned time period 1 Tab 1, Line 1: 1
16.
F7 1 + * 1
Route table 1 is assigned route 1 Tab 1, Line 2: 1
17.
F2 * 1
Route table 1 is assigned outdial rule 1 Tab 1, Line 2: 1
18.
F2 F2 * 2
Route table 1 is assigned time period 2 Tab 1, Line 2: 1
19. F7 F7 8-1 * 0CZ Dial plan 1 is set to 0CZ
0=route code for route 1,
C=activates a dial tone,
Z=all digits may be dialled
Line 1: 0CZ
20.
F2 * 1
Dial plan 1 is assigned route table 1. Line 1: 1
21. F8-F7 Exit system administration Set time, Set date
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.37 COS changeover after timeout
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_837.htm (2 of 2) [06/04/2000 13:14:36]