8.40 Mozart CD/Genius announcement device at
the SLA board
Introduction
Two relays must be incorporated when connecting the Mozart CD/Genius announcement device.
Relay 1 is used as a control input for the announcement device, and
Relay 2 switches the permanent 600-ohm loop at the device.
Connection of Mozart CD
Figure 8-2 Connection of Mozart CD to SLA
Operation as MOH
Announcement type: music on hold
Relay 1: type: announcement - time: 0 x 100 ms - extension: a/b call number
Relay 2: type: after timeout - time: 0 x 100 ms - extension: a/b call number
Hicom 150 E Office Rel.1.0 Service Manual - 8.40 Mozart CD/Genius announcement device at the SLA board
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_840.htm (1 of 2) [06/04/2000 13:14:46]
To Next Page
Loading...
