Siemens Hicom 150 E Office - Page 87

When starting up S
0
ports, it is important to ensure that the NT switch is in the "POINT TO
POINT" position during operation with PABXs.
S0 networking
Figure 3-23 S
0
networking options
S0 bus for connecting ISDN terminals
Hicom 150 E Office Rel.1.0 Service Manual - 3.3 Peripheral boards
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_32.htm (14 of 46) [06/04/2000 13:03:53]