Siemens Hicom 150 E Office - Accessing Other Functions Via Codes; Accepting a Waiting Call; Call Waiting

9
Accessing Other Functions Via Codes
Call Waiting
Accepting a Waiting Call
You hear a bleep tone during a call
To return to the first call
Lift the handset.
Dial the internal station number.
If the party is busy, wait approximately five
seconds. The party is then called.
Replace the handset (the current call is dis-
connected). Your telephone rings.
Lift the handset.
or
Press the key.
Enter the code
*
55, and conduct a call with
the waiting party (the first call is on hold).
()
5 5
Press the key.
Enter the code
*
0 or wait 2 seconds and re-
sume the first call (the second call is discon-
nected).
or (depending on the configuration)
Press the key twice
and resume the first call (the second call is
disconnected).
()
0
()
Accessing Other Functions Via Codes