Siemens HiPath 1130 - Configuring the Call Answering Mode

Step by Step
Fax/DID Module
110
= Fax Mode - Greeting announcement for busi-
ness hours (maximum of 24 seconds)
= Fax Mode - Greeting announcement for Night
Service (maximum of 24 seconds)
= Fax Mode - Announcement for transferring
calls (maximum of 16 seconds)
= DID Mode - Greeting announcement for busi-
ness hours (maximum of 32 seconds)
= DID Mode - Greeting announcement for Night
Service (maximum of 32 seconds)
= DID Mode - Announcement for transferring
calls (maximum of 16 seconds)
= Fax/DID Mode - Greeting announcement for
business hours (maximum of 32 seconds)
= Fax/DID Mode - Greeting announcement for
Night Service (maximum of 32 seconds)
= Fax/DID Mode - Call Forwarding announce-
ment (maximum of 16 seconds)
= Caller ID Announcement Mode (maximum of
16 seconds)
= Alarm Announcement Mode - for HiPath 1120
only (maximum of 8 seconds)
= Reservation
Speak directly into the handset to record an announce-
ment. Or listen to a recorded announcement.
Press this key to stop the recording or the playback of
the announcement.
or Enter the code for recording ("9") or for playing back ("0")
a new announcement.
or
Press this key.
Initial state for Programming Mode.
Configuring the Call Answering Mode
The Fax/DID Module’s Auto-Answering Mode must be
configured individually for each analog and digital line.
0 1
0 2
0 3
0 4
0 5
0 6
0 7
0 8
0 9
1 0
1 1
1 2
w
1
9
0
#