Step by Step
Fax/DID Module
112
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Select an external line (e.g., 801) for Fax/DID Reception.
Enter the extension number for Fax Reception (e.g., 12/
102).
Enter the number for the next external line available.
or
Press this key.
Initial state for Programming Mode.
Deleting Fax Reception Extensions
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter a number for an external line (e.g., 801) assigned
to Fax Reception.
The Fax extension selected is removed.
If necessary, enter the number for the next external line
available.
or
Press this key.
Initial state for Programming Mode.
2 8
#
You must first program the extension for fax in
"Type of Equipment Connected to an Extension -
Code 003" before programming Code 28.
2 8
*
#
To Next Page
Loading...
