Siemens HiPath 1130 - Collect Call Barring for Fax;DID

Fax/DID Module
113
Step by Step
Collect Call Barring for Fax/DID
When Collect Call Barring is active, all collect calls made
to a Fax/DID are automatically rejected by the system.
Call Barring will not work in the case of calls transferred
to a Fax/DID.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
... Select an operating mode for the Fax/DID Module:
= Fax
= DID
= Fax/DID
= Message (announcement)
or Activate/Deactivate Collect Call Barring for the selected
mode:
= To activate
= To deactivate (default)
Enter the next operating mode
or
Press this key.
Initial state for Programming Mode.
0 80
1 4
1
2
3
4
*
#
*
#
#
If a call has been answered at least once by the
system, Collect Call Barring cancels the blocking.
When an incoming call over a digital line is for-
warded for not being answered (*14), and Col-
lect Call Barring is activated, the call will ring at
the First Attendant for the external line.