Siemens HiPath 1130 - Page 139

VMIe Protocol
139
Step by Step
1. Internal call from Extension 16 to the VMIe Group:
***1***16*1;
2. Internal call from Extension 15 directly to Extension
11 which is forwarded (*11) to the VMIe Group:
***3****15****11*1;
3. Internal call from Extension 11 directly to Extension
15 which is forwarded to the VMIe Group configured
as a Second Attendant. ***4****11****15*1;
4. Incoming call over an external analog line to Exten-
sion 11 which is forwarded (*11) to the VMIe Group:
***3**********11*3;
5. Incoming call over an external digital line to Exten-
sion 11 which is forwarded (*11) to the VMIe Group:
***3**********11*4;
6. Incoming call over an external analog line to Exten-
sion 12 which is forwarded to the VMIe Group con-
figured as Second Attendant:
***4**********12*3;
7. Incoming call over an external digital line to Exten-
sion 12 which is forwarded to the VMIe Group con-
figured as Second Attendant:
***4**********12*4;
3
Extension called
Required element for calls Type 3 and 4.
This element remains blank for all types of calls.
Fixed size: 6 DTMF signals
Format: “****i” (i = extension called)
Note: if an extension is
longer, the DTMF digit “*”
in the protocol is replaced
by the additional extension
digit.
4
Additional information about the calling extension
Optional element
Fixed size: 2 DTMF signals
Format: “*i” (i = code in table below)
Code Information
1 The calling extension is a regular internal extension
2 Not used
3 The calling extension is an external user on an analog line.
4 The calling extension is an external user on a digital line