Summary of Programming Codes
178
Call Detail Report through Serial
InterfaceÆ page 106
006 # (disabled)
Fax/DID ModuleÆ page 107
Call Answering MenuÆ page 108 009 None
Announcement RecordingÆ page 109 37
Configuring the Call Answering ModeÆ page 110 27 0 - For all external lines
Fax Reception ExtensionÆ page 111 28 None
Collect Call Barring for Fax/DIDÆ page 113 008 # (disabled)
MSN Answering for Fax/DIDÆ page 114 080 0 - Module is deactivated
Fax Extension for MSNÆ page 114 081 None
Fax/DID Release after TimeoutÆ page 115 094 06 (30 seconds)
Programming a Digital TrunkÆ page 116
S0 PortsÆ page 117 062 1 - External line and
extension
Mode of OperationÆ page 118 90 1 - For the first PP port
3 - For all others: S
0
BUS
Symmetric CallÆ page 119 074 * (enabled)
Absence of ACK Setup for external ISDN
LineÆ page 119
075 # (disabled)
NotifyÆ page 119 076 * (enabled)
Automatic KeypadÆ page 120 077 # (disabled)
Assignment of an external ISDN line to a
MSNÆ page 120
078 All assigned
External Line PrefixÆ page 122 89 None
External Number RegistrationÆ page 122 91 None
Assigning an External Number to an
ExtensionÆ page 123
92 None
Busy SignalÆ page 124 004 None
Local Area Code FilterÆ page 125 011 None
Country Area Code FilterÆ page 125 012 55 - Brazil
ADSL ModuleÆ page 126
Restoring the ADSL Module Default
SettingsÆ page 127
013 IP 10.0.0.1
Relay and Sensor on the HiPath 1120Æ page 127
Programming the Sensor’s FunctionÆ page 127 70 0 - deactivated
Programmed Function Code Default Settings
To Next Page
Loading...
