Siemens HiPath 1130 - Extension Coefficient

Step by Step
Programming an Extension
64
to = for HiPath 1120
to = for HiPath 1130/1150
to = for HiPath 1190
Enter the extension number (e.g., 12/102) to which you
want to assign a CD port.
Enter the next number for the CD port and extension.
or
Press this key.
Initial state for Programming Mode.
Deleting a CD Assignment from an Extension
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter the extension number to be deleted.
Delete the CD assignment from the extension.
Enter the next extension number
or
Press this key.
Initial state for Programming Mode.
Extension Coefficient
If the impedance value or appropriate type of internal
line is available, the quality of transmission and recep-
tion can be improved.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter the analog extension number (e.g., 12/102).
0
1
0
4
0
1
0
8
0
1
2
4
#
4 6
*
#
By default, the assignment starts at the first
extension slot on HiPath 1120/1130/1150
systems.
On the HiPath 1190 system there is no default
assignment.
4 8