Programming an Extension
65
Step by Step
... Enter the appropriate number for the type of line.
For example, in the case of Brazil it would be:
= 900 Ω Standard Line (default)
= 600 Ω Line
= 900 Ω Standard Line (default)
= 600 Ω Line
Enter the next extension number
or
Press this key.
Initial state for Programming Mode.
External Message Waiting Indicator
(MWI)
When Voice Mail services are provided by a local carrier,
the HiPath 1100 enables a feature called Message
Waiting Indicator (MWI) on the Voice Mail Server. With
this feature a group of extensions called an External
MWI Group is able to receive signals generated by the
Voice Mail Server that indicate when there is a message
waiting in the user’s mailbox.
This signaling is transmitted using a FSK protocol
(Æ page 33). The signals are detected over an external
analog line by a Voice Mail Server configured for this
type of protocol.
For standard telephones with a display MWI will only be
indicated if a CLIP is configured for the extension using
option 3 or 4 (Æ page 56).
1 4
1
2
3
4
#
See Voice Mail Protocol Æ page 138.
To Next Page
Loading...
