Siemens HiPath 1130 - Type of Equipment Connected to an Extension; Auto-Answering Mode

Programming an Extension
69
Step by Step
Type of Equipment Connected to an Ex-
tension
This setting specifies the type of equipment that is
connected to a selected extension slot.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter the extension number (e.g., 11/101).
... Select the type of equipment:
= Standard (default)
= Fax
= Answering machine
Enter the next extension number
ou
Press this key.
Initial state for Programming Mode.
Auto-Answering Mode
This setting specifies the use of Auto-Answering Mode
for the telephone by using a feature code (see
Functions used for Making Calls - Speakerphone Auto-
Answering Mode in the User Manual).
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter the extension number (e.g., 11/101).
or Activate/Deactivate permission to use Auto-Answering:
= To activate
= To deactivate (default)
Enter the next extension number
or
0 30
0 2
0
1
2
#
0 3 4
*
#
*
#