Step by step
Important settings
32
dkf w Enter the programming code.
q or r w To activate/deactivate the permission:
q = Activated
r = Deactivated (default)
w Initial status for programming mode.
Assigning a class of service (COS)
Required: Programming mode must be activated (*95
31994).
eee w Enter the programming code.
p w Enter the number for the group of external lines (e.g., 0,
890...899).
p w Enter a class of service for day mode and another for
night mode:
• 1st digit defines the input for day service class
• 2nd digit defines the input for night service class
Classes of service:
d = Restricted
e = Outward-restricted trunk access with Denied
List 1
(10 slots)
f = Outward-restricted trunk access with Denied
List 2
(25 slots)
g = Outward-restricted trunk access with Denied
List 3
(35 slots)
h = Outward-restricted trunk access with permis-
sion list 1
(10 slots)
i = Outward-restricted trunk access with permis-
sion list 2
(25 slots)
j = Outward-restricted trunk access with permis-
sion list 3
(25 slots)
k = Unrestricted Trunk Access (default for all lines)
To Next Page
Loading...
