Step by step
Programming an extension
78
Hotline
With this feature a number entered in the speed dialing
phonebook can be called automatically as soon as the
handset is lifted without having to dial it manually.
An administrative extension (11/101), an overflow exten-
sion or a door opener extension cannot be configured
as a Hotline. If a Hotline is assigned to a certain exten-
sion and one of these features is activated, the Hotline
will be automatically removed from that extension.
By default, no telephone is configured as a Hotline.
Required: Programming mode must be activated (*95
31994).
Activation of Hotline mode
ehi w Enter the programming code.
p w Enter the extension number (e.g. 12/102) to be as-
signed a Hotline mode.
p w Enter the speed dialing number you want to select
(e.g., 000 to 249).
p w Enter the next extension number.
or
r w Press this key.
Initial status for programming mode.
Disabling Hotline mode
Required: Programming mode must be activated (*95
31994).
ehi w Enter the programming code.
p w Enter the extension number (e.g. 12/102) for which you
want to remove a Hotline assignment.
q w The Hotline Mode is deactivated.
p w Enter the next extension number.
Any entry in the speed dialing phonebook can be
configured as a Hotline for many extensions.
There is an option that allows you to time the call
for a specified speed dialing number: the Warm-
line (code 162). The extension can dial any num-
ber until the system times out.
To Next Page
Loading...
