Siemens HiPath 3350 - Page 1049

service.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
12-75
Nur für den internen Gebrauch Service
Guided Maintenance
16-024 !idle arrived after
restart
System has
reached idle status
after restart.
None
16-030 !exceed. of CSTA
mon. pts
Number of CSTA
monitor points ex-
ceeded.
Check the number of sub-
scribers, lines, and ACD
groups configured.
Error Class 18 – Messages Concerning Database Handling and License Management
18-012 HLM:Start grace
period
HiPath License
Management:
Grace period was
started.
If necessary, load license
from the CLS and reli-
cense the system.
The remaining li-
cense validity
period is shown
on the display.
18-016 HLM:Feat-ID: xxx
expiration started
HiPath License
Management: The
specified feature is
still valid for up to
30 days.
If the customer still re-
quires this feature, a new
license file must be or-
dered and loaded to the
system.
The remaining li-
cense validity
period is shown
on the display.
18-017 HLM:Feat-ID: xxx
expired
HiPath License
Management: The
validity period of
the specified fea-
ture has expired.
If the customer still re-
quires this feature, a new
license file must be or-
dered and loaded to the
system.
Table 12-7 HiPath 3000 Class B Error Messages
No. HiPath 3000/
5000 Manager E:
Event Log Entry
Meaning Required Measures Note