Siemens HiPath 500 - Fitting the Attachment Clip; Setting the Handset Display Language

Step-by-Step
Putting the handset into service
16
Fitting the attachment clip
Press the attachment clip onto the back of the handset
until the tabs on the sides engage in the recesses on
the phone.
Setting the handset display language
If your preferred language for display texts is not set as
the default, then you can set this yourself.
Open the main menu
© or G Open the main menu of the mobile phone.
Open the submenu
either:
D E [Select and confirm the menu item.
or:
D E [Select and confirm the menu item.
Open the submenu
either:
D E [Select and confirm the menu item.
or:
D E [Select and confirm the menu item.
H/Set Settings
Einstellungen
Language
Sprache