Siemens HiPath 500 - Using Speed-Dial Keys and Numbers

Conducting calls – enhanced functions
47
Step-by-Step
• Calls are only forwarded when the line is busy
(3=when busy).
Activating call forwarding to a "trunk"
c Press the Talk key.
Call the system menu.
> < [Select and confirm the menu item.
> < [Select and confirm the menu item.
o [ Enter and confirm your own multiple subscriber
number.
either:
> < [Select and confirm the menu item.
or:
> < [Select and confirm the menu item.
or:
> < [Select and confirm the menu item.
continue:
o Enter the phone number of the destination (without ex-
ternal code).
Save the settings.
Deactivating call forwarding to a "trunk"
c Press the Talk key.
Call the system menu.
> < [Select and confirm the menu item.
> < [Select and confirm the menu item.
o Follow the user guidance system from this point on-
wards (enter a multiple subscriber number or DID and
forwarding type).
[ Confirm your entries.
a Press the On-hook key to end the process.
Menu
Service?
Trunk FWD on?
1=immediate?
2=on no answer?
3=on busy?
Save
Menu
Service?
Forward by Network
OFF?