Siemens HydroRanger 200 HMI - Page 234

Parameter reference
8.6 Setup (2.)
HydroRanger 200 HMI
232 Operating Instructions, 06/2018, A5E36281317-AC
The TVT curve is divided into 40 breakpoints, accessible by enabling the point number as
the breakpoint index field. Each breakpoint is normalized to a value of
0
, as displayed in the
parameter value field. By changing the breakpoint value, up or down, the intensity of the bias
applied to that breakpoint of the curve is respectively changed. By changing the value of
adjacent breakpoints, the effective bias to the shaper can be broadened to suit the desired
correction. In the case of multiple false echoes, shaping can be applied along different points
of the curve. Shaping should be applied sparingly in order to avoid missing the true echo.
2.11.4.1. Brkpt. 1-10
2.11.4.1.1. TVT Brkpt. 1
2.11.4.1.2. TVT Br
kpt. 2
2.11.4.1.3. TVT Brkpt. 3
2.11.4.1.4. TVT Brkpt. 4
2.11.4.1.5. TVT Brkpt. 5
2.11.4.1.6. TVT Brkpt. 6
2.11.4.1.7. TVT Brkpt. 7
2.11.4.1.8. TVT Brkpt. 8
2.11.4.1.9. TVT Brkpt. 9
2.11.4.1.10. TVT Brkpt. 10
2.11.4.2. Brkpt. 11-20
2.11.4.2.1. T
VT Brkpt. 11
2.11.4.2.2. TVT Brkpt. 12
2.11.4.2.3. TVT Brkpt. 13
2.11.4.2.4. TVT Brkpt. 14
2.11.4.2.5. TVT Brkpt. 15
2.11.4.2.6. TVT Brkpt. 16
2.11.4.2.7. TVT Brkpt. 17
2.11.4.2.8. TVT Brkpt. 18
2.11.4.2.9. TVT Brkpt. 19
2.11.4.2.10. TVT Brkpt. 20
2.11.4.3. Brkpt. 21-30
2.11.4.3.1. TVT Brkpt. 21
2.11.4.3.2. TVT Brkpt. 22
2.11.4.3.3. TVT Brkpt. 23
2.11.4.3.4. TVT Brkpt. 24
2.11.4.3.5. TVT Brkpt. 25
2.11.4.3.6. TVT Brkpt. 26
2.11.4.3.7. TVT Brkpt. 27
2.11.4.3.8. TVT Brkpt. 28
2.11.4.3.9. T
VT Brkpt. 29
2.11.4.3.10. TVT Brkpt. 30