Siemens HydroRanger 200 HMI - Page 260

Parameter reference
8.7 Maintenance and Diagnostics (3.)
HydroRanger 200 HMI
258 Operating Instructions, 06/2018, A5E36281317-AC
Reading minimum (3.2.8.9.)
Shows the lowest reading calculated (in normal Reading units).
Index
Level
Values
Range: -999 ... 9999 (read only)
Related
• Pump records (3.2.9.) (Page 260)
To reset the values once the installation is working correctly, enter the value 9999.
Transducer selector (3.2.8.10.)
Sets the transducer index for all parameters applicable to this sub-menu.
Space (3.2.8.11.)
Shows the distance between the monitored surface and Span (2.2.2.) (Page 169).
Index
Level
Values
Range: -999 ... 9999 (read only)
Related
• Span (2.2.2.) (Page 169)
Distance (3.2.8.12.)
Shows the distance between the monitored surface and the transducer face.
Index
Transducer
Values
Range: 0.000 ... 9999 (Read only)
Head (3.2.8.13)
Shows the distance from Zero Head (2.13.4.5.) (Page 244) to the monitored surface in Units
(2.1.1.) (Page 162).
Index
Single-point model
Dual-point model
Global
Transducer
Values
Range: 0.000 ... 9999 (Read only)
Related
• Units (2.1.1.) (Page 162)
• Span (2.2.2.) (Page 169)
• Zero head (2.13.4.5.) (Page 244)