Siemens HydroRanger 200 HMI - Page 261

Parameter reference
8.7 Maintenance and Diagnostics (3.)
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
259
Flow (3.2.8.14.)
Shows the calculated flowrate in Maximum Flow (2.13.4.3.) (Page 243) units.
Index
Single-point model
Dual-point model
Global
Transducer
Values
Range: 0.000 ... 9999 (Read only)
Related
• Maximum flow (2.13.4.3.) (Page 243)
Flow maximum (3.2.8.15.)
Shows the highest flow rate calculated (in units).
Index
Single-point model
Dual-point model
Global Transducer
Values
Range: -999 ... 9999 (Read only)
Related
• Maximum flow (2.13.4.3.) (Page 243)
Flow minimum (3.2.8.16.)
Shows the lowest flow rate calculated (in units).
Index
Single-point model
Dual-point model
Global
Transducer
Values
Range: -999 ... 9999 (Read only)
Related
• Maximum flow (2.13.4.3.) (Page 243)
Transducer temperature (3.2.8.17.)
Displays the temperature in °C (as monitored by the connected transducer).
Index
Transducer
Related
Range: -50 ... 150
TS-3 temperature (3.2.8.18.)
Displays the temperature in °C (as monitored by the TS-3 temperature sensor).
Index
Transducer
Related
Range: -50 ... 150