Siemens HydroRanger 200 HMI - Simulation (3.3.); Discrete Inputs

Parameter reference
8.7 Maintenance and Diagnostics (3.)
HydroRanger 200 HMI
266 Operating Instructions, 06/2018, A5E36281317-AC
8.7.3
Simulation (3.3.)
Tests the application.
8.7.3.1
Discrete Inputs
Discrete input 1 (3.3.1.1.)
Sets how Discrete Input 1 signals are interpreted by the device.
Index
Discrete Input (DI)
Options
Forced OFF
Forced ON
*Normally open
Normally closed
Related
Discrete input number (2.9.1.2.) (Page 208)
Level override value (2.9.1.3.) (Page 208)
Discrete input 2 (3.3.1.2.)
Sets how Discrete Input 2 signals are interpreted by the device.
Index
Discrete Input (DI)
Options
Forced OFF
Forced ON
*Normally open
Normally closed
Related
Discrete input number (2.9.1.2.) (Page 208)
Level override value (2.9.1.3.) (Page 208)
Discrete input 1 scaled state (3.3.1.3.)
Shows the current value of the discrete input after any scaling is applied. Read only.
Index
Discrete Input
Modes
Active
Inactive
Readings are updated continuously even in PROGRAM mode. The value signals a level
override event.