Siemens HydroRanger 200 HMI - Panel mount

Installing/mounting
4.2 Mounting Instructions
HydroRanger 200 HMI
34 Operating Instructions, 06/2018, A5E36281317-AC
4.2.5
Panel mount
Installing the panel mount unit requires making a cutout in the panel. The dimensions for the
cutout are provided in the illustration below. A full size cutout template is provided with your
unit or may be downloaded from https://support.industry.siemens.com
(https://support.industry.siemens.com/cs/ww/en/view/18619938
).
Dimensions in mm (inch)
①
6.3 mm diameter (0.25 inch)
②
Min. rad. (type)