INHAB™ ENERGY INSTALLATION GUIDE
Step 1: Get the app
Use the camera on your phone to scan the unique QR code located either on the
back of the Inhab Energy monitor or on the Getting Started Guide included in the
box. This QR code will take you to the Siemens Inhab Energy Monitoring home
page, where you can download the Siemens Inhab Energy app onto a phone or
tablet from the Apple App Store or Google Play and start the Inhab Energy setup
process. Once the app is downloaded, you’ll be prompted to create an account if
you don’t have one.
Also, if you plan to connect the Inhab Energy to the internet via Wi-Fi, this is a great
time to use a phone to check the signal strength of the Wi-Fi network next to the
electrical panel in the home. Low/no signal may require a Wi-Fi extender or an
ethernet connection for the Inhab Energy to work properly.
To Next Page
Loading...
