en
9
Controls
Fig. "
Switching on the
appliance
Fig. "
1. Insert the plug in the socket.
2. A warning signal sounds. The
temperature display 3 flashes.
3. Press the temperature setting button
1. The warning signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 3 is lit.
The factory recommends the following
settings:
■ Refrigerator compartment: medium
setting
■ Freezer compartment: -18°C
Store delicate foods in the refrigerator
compartment.
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■ The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Refrigerator compartment
Turn temperature controller, Fig. !/8, to
the required setting.
We recommend the setting in line with
the marking.
Changing the setting clockwise will lower
temperatures in the refrigerator
compartment.
At a room temperature below 16°C,
slightly increase the temperature setting
in the appliance. At a room temperature
above 32°C, slightly reduce the
temperature setting in the appliance.
8 Temperature controller
9 Vegetable container
10* Freezer tray
11 Frozen food container (small)
1 Temperature selection button
The required temperature is set
with this button.
2 “super” display (freezer
compartment)
Illuminates when super freezing
is on.
3 Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
4 Eco mode indicator
This lights up when the eco mode
is switched on.
To Next Page
Loading...
