EasyManua.ls Logo

Siemens iQ500 CM485AGB0 Series - Accessories; Accessory Use and Insertion

Siemens iQ500 CM485AGB0 Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories en
11
Condensation
Condensation can occur in the cooking compartment
and on the appliance door when cooking. Condensa-
tion is normal and does not adversely affect appliance
operation. Wipe away the condensation after cooking.
4.4 Appliance door
If you open the appliance door during operation, opera-
tion stops. If the appliance door is closed, you can con-
tinue operation with ⁠ .
Accessories
5  Accessories
Use original accessories. These have been made espe-
cially for your appliance.
The accessories supplied may differ depending on the
appliance model.
Accessories Use
Wire rack ¡ Wire rack for baking
and roasting in oven
operation.
¡ Wire rack for grilling,
e.g. steaks, sausages
and bread
¡ Wire rack as a storage
space, e.g. for flat
ovenproof dishes
5.1 Other accessories
You can purchase other accessories from our cus-
tomer service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
siemens-home.bsh-group.com
Accessories are appliance-specific. When purchasing
accessories, always quote the exact product number (E
no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our customer
service.
Glass roasting dish
Use
¡ Stews
¡ Bakes
Pizza tray
Use
¡ Tray bakes
¡ Biscuits
5.2 Inserting the accessory
The accessory can be inserted in two positions.
Insert the accessory so that it does not touch the
appliance door.
Insert the accessory in the high po-
sition.
Insert the accessory in the low po-
sition.
The accessories supplied may differ depending on
the appliance model.
The image shows the engagement position.
The image shows the engagement position.
Before using for the first time
6  Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Performing the initial configuration
After connecting the appliance to the power supply or
following a power cut, the following prompt appears in
the display for the setting the time. It may take a few
seconds for the prompt to appear.
Connect the appliance to the power supply.
a ⁠: flashes in the display and lights up.
Setting the time
1.
Set the time using the rotary selector.
2.
Press ⁠.
a The time is set.

Table of Contents

Related product manuals