Siemens iQ500 NB535AB 0B Series - Appliance Door: Installing Upper Door Panes; Installing Upper Door Panes

Appliance door en
23
15.8 Installing the door panes for the upper
the appliance door
WARNING‒Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶ Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶ Wear protective gloves.
1.
Slide in the intermediate pane. When doing so, en-
sure that the number on the intermediate pane is at
the bottom right ⁠.
2.
Slide the intermediate pane until it is in the left- and
right-hand retainers ⁠ ⁠.
3.
Push the intermediate pane upwards until it is in the
retainer ⁠.
4.
Place the inner pane onto the seal ⁠.
5.
Slide the inner pane in. In doing so, ensure that the
inner pane is in the retainer ⁠.
6.
Push the inner pane upwards until it is in the left-
and right-hand retainers ⁠.
7.
Put the door cover in position and push down on it
until you hear it click into place.
8.
Slide the appliance door straight onto the two
hinges. Slide the appliance door on as far as it will
go. When doing so, ensure that the hinges are in-
serted into the correct opening.