en Installation instructions
34
6.
Remove the transport locks on the right and left and
then dispose of them.
7.
The appliance must be transported by two people
using the carry handles on the right and left, while
securing the front of the appliance with one hand.
8.
Place the appliance in the unit and fold the carry
handles down.
9.
Push the appliance in fully.
Do not kink or trap the connecting cable, or route it
over sharp edges.
10.
Centre the appliance.
There must be an air gap of at least 5mm between
the appliance and adjacent unit fronts.
11.
Use a spirit level to adjust the appliance so that it is
perfectly level.
12.
Attach the brackets for the metal screws that are in
the accompanying bag to the appliance.
13.
Secure the appliance using the wooden screws sup-
plied in the cooking compartment.
20.10 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.
To Next Page
Loading...
