EasyManua.ls Logo

Siemens iQ700 HB778G3 1B Series - Oven Rail Maintenance; Detaching and Attaching Oven Rails

Siemens iQ700 HB778G3 1B Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en Rails
28
1.
Slide the first intermediate pane into the lowest re-
tainer and fit it at the top.
2.
Note:The intermediate pane is automatically posi-
tioned by the rotational movement of the spacer.
Slide the second intermediate pane into the central
retainer and fit it at the top.
3.
Close the metal strip on the left and right ⁠.
4.
Note:The lettering "Pyro" must be legible at the top,
as shown in the picture.
Slide the inner pane into the retainer at the bottom
and fit it at the top.
5.
Push the inner pane in at the top . Push the sliding
caps downwards in the direction of the arrow.
6.
Open the appliance door fully.
7.
Close the locking levers on the left- and right-hand
hinges
8.
Close the appliance door.
Note:Do not use the cooking compartment again until
the door panes have been correctly fitted.
Rails
22  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
22.1 Detaching the rails
WARNING‒Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
1.
Lift the rail forwards slightly and detach it ⁠.

Table of Contents

Related product manuals