Siemens iQ700 HB976GM 1B Series - Meat Probe; Probe Usage and Safety

Meat probe en
15
Changing the timer
You can change the timer at any time.
1.
Press the button.
2.
Press "Stop".
3.
Change the timer.
4.
Press "Start".
Cancelling the timer
1.
Press the button.
2.
Press "Stop"
3.
Reset the timer using .Reset the timer using .
4.
Press ⁠.
Meat probe
11 Meat probe
Cook with precision by inserting the meat probe into
the food and setting a core temperature on the appli-
ance. The meat probe measures the core temperature
inside the food. Once the set core temperature has
been reached in the food, the appliance automatically
stops heating.
11.1 Suitable types of heating with the meat
probe
Only certain types of heating are suitable for use with
the meat probe.
You can use the meat probe with the following types of
heating:
¡ 4Dhot air
¡ Top/bottom heating
¡ Bottom heat
¡ Top/bottom heat gentle
¡ Hot air gentle
¡ Circulated air grilling
¡ Pizza setting
¡ Keeping warm
¡ Slow cooking
11.2 Inserting the meat probe
Use the meat probe supplied or order a suitable meat
probe from our customer service.
WARNING‒Risk of electric shock!
Using the wrong meat probe could damage the insula-
tion.
▶ Only use the meat probe for this specific appliance.
ATTENTION!
Otherwise the meat probe may be damaged.
▶ Do not trap the cable of the meat probe.
▶ To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few centi-
metres between the grill element and the meat
probe. The meat may expand during the cooking
process.
WARNING‒Risk of injury!
The meat probe is sharp.
▶ Handle the meat probe with care.
Note:If the pull-out rails are attached at level 3, you
cannot insert the roasting sensor in the cooking com-
partment. Unhook the pull-out rails or hook them in at a
different level.
→"Rails", Page29
1.
Insert the meat probe into the food.
The meat probe has three measuring points. Ensure
that at least the middle measuring point is inserted
in the food.
Thin
pieces
of meat
Insert the meat probe into the thickest
part of the meat from the side.
Thick
pieces
of meat
Insert the meat probe diagonally into the
meat from above, pushing it in as far as
possible.
Note:If you want to turn the food, insert
the meat probe into the side of the food
so that it does not need to be removed
when turning.
Poultry Insert the meat probe into the thickest
part of the breast, pushing it in as far as
possible. The meat probe can be inser-
ted horizontally or vertically depending
on the size and shape of the poultry.
Turn the poultry and place it on the wire
rack breast-side down.
Fish When cooking whole fish, insert the
meat probe behind the fish's head in the
direction of the spine, pushing it in as
far as possible.
Place the fish on the wire rack in the
swimming position without turning it,
e.g. using half a potato as a support.
2.
Place the food with the meat probe into the cooking
compartment.