Siemens KG56NHX3P - Page 17

en
17
Activating the cameras
You can use this function to check via
the app at any time what is in your
refrigerator.Whenever the refrigerator
compartment door is closed, the
cameras take a photo of the refrigerator
compartment and the refrigerator
compartment door.
Note
The cameras only take one photo at this
moment. This ensures protection of your
privacy.
If your refrigerator is connected to both
your home network (WLAN) and the
Home Connect app, you can activate the
cameras:
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is deactivated.
2. Press °C button repeatedly until the
displays Ca and oF are shown.
3. Press + button to activate the
cameras.
The display shows on, the cameras
are activated.
Note
If the cameras are activated and the
refrigerator contents are interrogated
frequently via the app, this will result in
increased data transfer.
Note
Uploading the photos takes up to three
minutes.
Note
Various external factors in home network
and the Internet can cause transmission
problems and pictures to be discarded.
These have no effect on the appliance’s
basic functions.
Deactivating the cameras:
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is deactivated.
2. Press °C button repeatedly until the
displays Ca and on are shown.
3. Press- button to deactivate the
cameras.
The display shows oF, the cameras
are deactivated.
Resetting Home Connect settings
If the connection process does not work
or you would like to log the refrigerator
on to a different home network (WLAN),
you can reset the Home Connect
settings:
1. Press the super button and the
lock button simultaneously to open the
Home Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press the lock button
again until the lock is deactivated.
2. Press the °C button repeatedly until
the displays rE and oF are shown.