Technical Instructions LME Series
Document No. LME-1000
Section 8 Page 6 SCC Inc.
4. Use a mini-USB cable to connect the OCI417.10 to the computer, such as SCC part
number AGA5-05M. A driver may self-install the first time a connection is made. The
connected device will then be indicated on the screen.
5. The protocol can be changed between Modbus RTU and BACnet MS/TP from this
screen. See the previous sections for further details on the protocol-specific settings
that can be changed. Once the desired settings have been entered, click Submit to
apply. Click Reload to refresh the displayed settings.
To Next Page
Loading...
