Technical data
A.5 Technical data: LOGO! DM8 24 and LOGO! DM16 24
LOGO!
Manual, 04/2011, A5E03556174-01
329
LOGO! DM8 24 LOGO! DM16 24
Number 4 8
Output type Transistor,
current-sourcing
1)
Transistor,
current-sourcing
(1)
Electrical isolation No No
In groups of - - - -
Control of a digital input Yes Yes
Output voltage ≤ Supply voltage ≤ Supply voltage
Output current max. 0.3 A max. 0.3 A
Short circuit-proof and overload-
proof
Yes Yes
Short circuit current limitation Approx. 1 A Approx. 1 A
Derating none; across the entire
temperature range
none; across the entire
temperature range
Short circuit-proof cos 1 - - - -
Short circuit-proof cos 0.5 to 0.7 - - - -
Parallel output circuit for power
increase
Not permitted Not permitted
Protection of output relay (if
desired)
- - - -
Switching rate
Mechanical - - - -
Electrical 10 Hz 10 Hz
Ohmic load/lamp load 10 Hz 10 Hz
Inductive load 0.5 Hz 0.5 Hz
1)
When LOGO! 24/24o, LOGO! 24C/24Co, LOGO! DM8 24 or LOGO! DM16 24 are switched on,
signal 1 is sent to the digital outputs for about 50 μs. Take this into account, especially when using
devices that react to short pulses.
To Next Page
Loading...
