Siemens LOGO! Series - Technical Data: CM EIB;KNX

Technical data
A.14 Technical data: CM EIB/KNX
LOGO!
342 Manual, 04/2011, A5E03556174-01
A.14 Technical data: CM EIB/KNX
CM EIB/KNX
Mechanical data
Dimensions (WxHxD)
Weight
Installation
36 x 90 x 55 mm
Approx. 107 g
on a 35 mm profile rail 2 module widths or wall
mounting, must be mounted as the last module on the
right of LOGO!
Power supply
Input voltage 24 V AC/DC
Permissible range -15% ... +10% AC
-15% ... +20% DC
Power consumption from power supply max. 25 mA
Power consumption via bus 5 mA
EIB data transmission rate 9600 baud
Connections
Digital inputs (I) virtual max. 16
Digital outputs (Q) virtual max. 12
Analog inputs (AI) virtual max. 8
Analog outputs (AQ) virtual max. 2
Group addresses max. 56
Associations max. 56
Climatic conditions
Climatic withstand capability EN 50090-2-2
Ambient operating conditions 0 ... 55 °C natural convection
Storage and transport temperature - 40 °C ... +70 °C
Relative humidity 95 % at +25 °C (not condensing)
Electrical safety
Degree of protection IP 20 (in accordance with EN 60529)
Interference suppression EN 55011 (limit class B)
Certification IEC 60730-1
IEC 61131-2
Overvoltage protection Slow-blowing fuse 80 mA (recommended)
Electromagnetic compatibility (EMC)
EMC requirements Complies with EN 61000-6-1 and EN 61000-6-2
Approval
KNX/EIB certified
UL 508
FM
CE mark
In accordance with the EMC guideline (residential and
functional buildings), low voltage guideline