Installation instructions en
21
5.
Remove the appliance-side cable for the lighting.
6.
Undo the screws on the hinges up to approx.7mm.
Do not loosen them fully.
7.
Unhook and remove the filter cover.
8.
Remove the grease filters.
To avoid causing damage, do not bend the grease
filters.
9.
Open the odour filter cartridge.
10.
Remove the odour filter.
11.
Loosen the screws on the side covers.
12.
Remove the side covers.
13.
Close the odour filter cartridge.
14.
Loosen the cable that is provided on-site from the
terminal clamp.
15.
Carefully loosen the diagonally opposite screws.
16.
Disconnect the appliance from the key hole open-
ing.
17.
Slowly take the appliance down.
To Next Page
Loading...
