Installation instructions en
21
3. Open the filter cover by pulling it downwards.
4. Swing down the filter cover.
Open the filter cover fully and without pulling on it.
5. Remove the appliance-side cable for the lighting.
6. Undo the screws on the hinges up to approx.7mm.
Do not loosen them fully.
7. Unhook and remove the filter cover.
8. Remove the grease filters.
To avoid causing damage, do not bend the grease
filters.
9. Open the odour filter cartridge.
10. Remove the odour filter.
11. Loosen the screws on the side covers.
12. Remove the side covers.
13. Close the odour filter cartridge.
To Next Page
Loading...
