en Installation instructions
22
6.
Undo the screws on the hinges up to approx.7mm.
Do not loosen them fully.
7.
Unhook and remove the filter cover.
8.
Undo the opposite screws to loosen the fan box.
9.
Push the fan box to the side and release the pipe-
work.
10.
Push the fan box to the other side and pull out the
mains plug.
11.
Screw the fan box firmly back in place.
12.
Loosen the mounting brackets. Push the removal
slide inwards.
13.
Slowly take the appliance out of the cutout.
To Next Page
Loading...
