0.0
Safety instructions
A.1-18
0.0
MAGNETOM Family - Safety Information
0.0
Overview table
A.1
The following table of warning and prohibition signs must be
installed in a clearly visible location at eye level, preferably at
the door to the examination room. Depending on the system,
the field strength is also shown (for example, 1.5 T or 3 T).
A.1
A.1
Protective class symbols
A.1
Protection class B represents protection against electrical shock
with special emphasis on leakage currents.
A.1
The protective class symbol Type B/BF for application parts is
located e.g. at the patient table, the components for the physi-
ological measurement unit, and at the RF coils.
A.1
To Next Page
Loading...
